Новости

AGTOS — это активное предприятие, о котором всегда можно узнать много нового и интересного. Благодаря разделу новостей Вы постоянно будете в курсе последних событий.

июня 2018 Inductive flow sensor for ferromagnetic abrasives

AGTOS presents new flow sensor

Constant blasting parameters are essential for solidification processes. For this reason, the amount of abrasive inside the blasting process should be measured. The sensor measures the abrasive amount and can transfer it as an analogue standard signal (0-10 V) to a standard PLC control.

мая 2018 AGTOS at the Metal China exhibition in Beijing

AGTOS at the Metal China exhibition in Beijing

For the first time AGTOS is present at the Metal China exhibition in Beijing from the 16th to 19th May 2018. At the booth of our representative TAA, the largest Chinese abrasive manufacturer, visitors will see a rubber belt tumble blast machine as well as a high-performance turbine TA 4.6 and a model of a steel mill.

мая 2018 Der ROPA Tiger 6 erhält den „Red Dot“ Award

The ROPA Tiger 6 receives the "Red Dot" Award

The jury has decided: The ROPA Tiger 6 received the "Red Dot" Design Award 2018. The panel of experts only awards the internationally recognized seal of quality to products that impress with their innovation combined with a high design quality...

апреля 2018 Wagner-Symposium in Polen

For the first time AGTOS will attend the Wagner Symposium: Powder coating, wet painting, galvanizing 2018 in Rawa Mazowiecka, Poland

Together with SLF Oberflächentechnik GmbH, the colleagues of AGTOS Polska will be present at the event from 25th to 27th April 2018.

For the first time, the topic of galvanizing processes will be presented during the symposium in addition to powder coating and wet painting.

Wagner, one of the world's leading manufacturers of surface coating equipment and systems, has been organizing this event for over ten years.

марта 2018 Continuous overhead rail shot blast machine

Guideline for the identification of non-compliant shot blasting machines

A shot blasting machine marketed for the first time in the European Economic Area must comply with the legislation and with all applicable safety and environmental requirements. As with other products, the manufacturer of a blasting machine with the CE mark confirms that the product complies with the relevant EU directives, the compliance is mandatory.

января 2018 Handtmann kauft Strahlanlage bei AGTOS

Handtmann purchases shot blasting machine from AGTOS

At the EUROGUSS exhibition, which took place from 16th to 18th January in Nuremberg, it became official. Handtmann Leichtmetallgießerei Annaberg GmbH ordered a wire mesh conveyor shot blast machine from AGTOS.

ноября 2017 OCEAN BLASTER erstmalig auf einer Messe in Chicago

For the first time OCEAN BLASTER on display at an exhibition in Chicago

At this year's FABTECH our partner OCEAN exhibited the OCEAN BLASTER for the first time. This special roller conveyor blast machine for profiles has convinced many customers in many countries worldwide. Accordingly, the interest of the visitors was very high.

октября 2017 Office building at AGTOS - producer of shot blast machines

Headquarters in Emsdetten enlarged

Recently the employees of AGTOS moved into the new extension of the AGTOS office building in Emsdetten. After a construction period of one year, the extension makes a better arrangement for the technical and commercial departments of the company.

октября 2017 Oberflächentechnik für Hersteller von technischen Federn

New AGTOS brochure

Technical springs are used in many shapes and sizes. Since they are heavily loaded, the surfaces have to meet the highest demands. AGTOS has already designed and built a large number of shot blasting machines for the sector of spring manufacturers. The new brochure presents solutions and gives suggestions. It is available in several languages.

сентября 2017 AGTOS Stahltechnik reinigt historische Turmuhr

AGTOS Blasting Technology cleans historic tower clock

The old church clock in the village of Laer in the Münster region became its own house. In 1891 the clock was built in Recklinghausen and first replaced in 1994. The workgroup of the home team placed the clock into stock and now, with the aid of many helpers, allowed the new commissioning of the mechanics. Previously, the parts were carefully cleaned using blasting technology.

августа 2017 Ausbildung beim Strahlanlagen-Hersteller

„Just the right way for me“

Studying and completing an apprenticeship at the same time? This sounds very stressful for many people. “It is purely a question of organization”, says Marius Lembeck. He is about to graduate from his dual Bachelor's degree in mechanical engineering at the University of Applied Sciences in Münster and can look back on eight fully-packed semesters.

мая 2017 AGTOS on the trade fair Hannover Messe 2017

AGTOS at the Hannover Messe

Together with 8 other companies, AGTOS was exhibiting on the joint stand of the VDMA in hall 6. Many customers, mostly international, were searching for information about new developments in the blasting technology.

Special attention was given to the exhibited drum shot blast machine. Additionally, a jury selected this machine to be a highlight of the fair and marked it with a banner.

апреля 2017 Wire mesh conveyor shot blast machine in USA

Дробемётная установка с проволочным транспортёром в США

Недавно была установлена дробемётная установка с проволочным транспортёром в США для поставляющей индустрии автомобильного сектора и передана клиенту. Марио Хинцен и Юлиан Клемм от фирмы АГТОС рады хорошему сотрудничеству с клиентом.

марта 2017 Große Strahlanlage in der Türkei

Большая дробемётная установка в Турции

На данный момент устанавливается большая дробемётная машина в литейном заводе в Турции. Речь идёт о проходном дробемёте подвесного типа с 4мя турбинами каждая в 30 кВт. Возможна обработка деталей и подвесок шириной до 1,70 м и высотой до 2 м. Мы рады хорошему продвижению строительных работ в этом немецко-турецком проекте.

марта 2017 AGTOS Ricochet-Strahler

AGTOS Рикошет бластер

Недавно посетили заинтересованные технические директоры наш завод в Емсдеттене. При этой возможности они осведомились о преимуществах предварительной обработки литейных изделий с помощью рикошетной дробемётной установки AGTOS.

февраля 2017 New blast machines in demonstration centre

Новые дробемётные установки в демонстрационном центре

Вдохновлять техникой. С этого момента мы представляем нашим посетителям новейшие модели наших демонстрационных машин. После того как была установлена дробемётная установка с желобчатым транспортёром типа MG 0090 находится в готовности для тестов установка подвесного типа HT 11-13. Сейчас устанавливается большая проходная дробемётная установка подвесного типа для тестов более габаритных элементов конструкции. Далее доступны рикошетная дробемётная установка для предварительной обработки литейных изделий, дробемётная установка с проволочным транспортёром типа BS 600 и дробемётная установка барабанного типа для деталей массового производства.

октября 2016 Auf der Messe EUROBLECH, 25.-29. Oktober 2016 in Hannover, traf das AGTOS-Messeteam viele internationale Besucher.

AGTOS at Euroblech 2016

During the fair Euroblech in Hannover from 25 to 29 October 2016, our fair team met many international visitors.

июня 2016 AGTOS Sales Days

AGTOS Sales Days

During the AGTOS Sales Days, the Sales Department informed our domestic and foreign sales partners about new developments in our company and the blasting technology.

декабря 2015 AGTOS congratulates ROPA on winning the Green Award

AGTOS congratulates ROPA on winning the Green Award

On 25 and 26 November 2015, professional experts and decision-makers from the industrial painting technology met for the congress “besser lackieren.” in Bad Neuheim in order to discuss about novelties in the areas of innovation, performance, efficiency, ecology and social activities which are closely linked with the painting process and to exchange personal experiences.

ноября 2015 Training concerning noise protection

Training concerning noise protection

Noise is an important topic for many users of blast machines. That is why AGTOS places special emphasis on professional advice during the project phase.

октября 2015 AGTOS took part in forum for agricultural and construction machinery called ”DFO Land- und Baumaschinen Forum“

AGTOS took part in forum for agricultural and construction machinery called ”DFO Land- und Baumaschinen Forum“

The first forum for agricultural and construction machinery called “DFO Land- und Baumschinen Forum” took place in Melle near Osnabrueck on 29/30 September 2015.

сентября 2015

Surface treatment in agricultural technology (ROPA)

We are very glad that our customer ROPA has made a movie about the pretreatment and coating of constructions for their products.

августа 2015 Новый партнёр в Индии

Новый партнёр в Индии

Недавно группа WESMAN www.wesman.com в Калькутте (Индия) и AGTOS согласовали сотрудничество.

июля 2015 Art contest

Art contest

On the occasion of the Children’s Day, an art contest has recently been organised in our plant in Konin.

июня 2015

Successful trade fair GIFA in Düsseldorf

Many visitors have watched the assembly demonstrations of our high performance turbines at the AGTOS booth. They were surprised about how simple and quick this service operation can be carried out.